How to install the whole wall cabinet to look good?
Do you know how to install the overall wall cabinet? How to install the whole wall cabinet beautifully and conveniently? The following wardrobe customization editor will take you to understand the relevant knowledge of the overall wall cabinet:
Often, many homeowners complain about the lack of closets after finishing their new home decor. There is not enough room to collect and place items, especially for a doll collection. We think of a lot of loose things, so before decorating, we need to think about storage space, and closets are one of the best ways to store things in the home. However, if you want to finish your home design beautifully, here are four tips from our wardrobe editor:
1. First of all, make sure that it is practical
Considering that closets are generally equipped with compartments and drawers, it should be noted that the distance between the compartments should not be too small, and the cabinet body should not be too deep, which is inconvenient to take clothes; there are three closet doors to avoid two doors intersect. Two sliding doors should be placed on one side of the door body; when the doors are folded, the distance between the drawer and the side wall should be seventeen centimeters.
2. The hidden design of the wall cabinet
There are many places in the house. The cabinet door is an ideal choice for not occupying space. Different materials have different transparency, so it is necessary to consider the transparency of each area.
3. Be careful when installing the cabinet door
Since the cabinet door must be supported by rails, the size of the piping must be known in advance. When customizing wall cabinets, the reserved size of the top line and bottom line is usually eight centimeters for folding doors and ten centimeters for sliding doors.
4. The general process of installing the integral wall cabinet
First, the upper railing must be reinforced. The front surface of the slide rail and the surface of the cabinet should be on the same plane, and the upper and lower slide rails should be aligned with the reserved positions. Then the door must be installed. After installing the door on the slide rail, measure the verticality of the door body, adjust the position of the upper and lower guide rails and fix it, and check whether the door body is parallel to both sides again. Adjust the body of the door by adjusting the bottom wheels to reach the height of the frame and sides. Finally, fix the anti-jump device and present the quality protection certificate.
The above is all the content introduced by the wardrobe customization editor. If you want to know more related information, please pay attention!