Classification of decorative panels

When many owners are decorating, it is a troublesome problem to choose the board that suits them, because there are too many types of boards, which makes people dazzled. What are the specific classifications of decoration boards? Let's follow the editor of furniture to find out.

1. Solid wood board

Solid wood boards are wood boards made of complete wood (logs). Solid wood boards are generally classified according to the name of the board substance (log material), and there is no uniform standard specification. Solid wood boards are durable and have natural textures. Most of them have the aroma of wood, have good hygroscopicity and air permeability, are beneficial to human health, and do not cause environmental pollution.

2. Large core board

Large core board (commonly known as blockboard, woodworking board) is a plywood with a solid wood core, which is made of two veneers glued together in the middle. Due to the special structure, it is mainly used for carpentry to make cabinets and on-site construction materials for decoration companies. The large core board has good screw holding force, high strength, strong quality, sound absorption, heat insulation, etc., and the moisture content is not high, easy to process, and has a wide range of uses.

3. MDF

Density board is made of wood fiber or other plant fiber, prepared by fiber, applied with synthetic resin, and pressed under heat and pressure. Due to its soft quality, impact resistance, high strength, and uniform density after pressing , It is also easy to reprocess, but the disadvantage is poor water resistance. Medium and high-density boards are made by grinding wood and adding glue under high temperature and high pressure. It is commonly used now. MDF is one of the better man-made boards in my country. The density board surface is smooth and flat, the material is fine and dense, the performance is stable, the edge is firm, and the surface of the board is very decorative.

4. Particleboard

Particleboard is a thin board made of wood chips as the main raw material, and then mixed with glue and additives. According to the pressing method, it can be divided into two types: extruded particleboard and flat-pressed particleboard. This type of board is low in cost, but its strength is poor and its nail holding power is relatively weak. It is generally not suitable for making larger furniture or furniture with mechanical requirements; there is also a particle board, which is actually a particle board, but its texture is more uniform and its stability is better. Some.

5. Plywood

Plywood, also known as plywood, commonly known as thin core board in the industry, multi-layer board is a three-layer or multi-layer board-like material formed by cutting wood sections into veneers or sliced ​​into thin wood, and then glued with adhesives. It is usually made of odd-numbered veneers, and the direction of adjacent veneers is glued vertically. The plywood plywood is weather-resistant and boiling water-resistant plywood, so it has the advantages of durability, high temperature resistance, and steam treatment.

6. Fireproof board

Fireproof board is a decorative board made of silicon material or calcium material as the main raw material, mixed with a certain proportion of fiber material, lightweight aggregate, adhesive and chemical additives, and made by autoclaving technology. It is more and more used A new type of material, its use is not only because of the fire protection factor. The construction of fireproof boards has relatively high requirements for pasting glue, and the cost of better-quality fireproof boards is more expensive than decorative panels; the thickness of fireproof boards is generally 0.8mm, 1.0mm, and 1.2mm, and many of the base materials are density boards. . Generally used in office workstations, toilet partitions and other places.

7. Ozon board (OSB)

Ozon board is also oriented strand board. When the shavings are paved and formed, the upper and lower surface layers of the oriented strand board will arrange the glue-mixed shavings longitudinally according to their direction, and the core layer shavings will be arranged horizontally to form a three-layer structure board embryo, and then hot pressed into oriented strand board. This kind of board has high unidirectional strength and can be used as a structural material with a more individual appearance. It is also seen that many home improvement companies have begun to use OSB instead of wood boards to make cabinets on site.